|
|
The
|
|
|
“Half Fast
|
III
|
” |
|
|
|
by Wild Bill Netzband
|
|
|
|
Plans
shown will be included with actual kit.
The “Half Fast III” was originally designed by "Wild"
Bill Netzband and kitted by Midwest in late 1940's. The
Half Fast
III is the third design in Wild Bill's
combat series of Half Fast models
with a 38" WING SPAN, 372 SQ. IN. WING
AREA
and requires a .35 engine.
A Great Flying wing with its swept
back L.E..
|
Option #1
Short kit will
include:
Front and rear firewalls,
B.C. mount, main gusset,
ribs, tank cover sides,
tank cover top, wood canopy, rudder, bottom skid and 1 folded sheet CAD drawn plans.
Not included are the:
Leading edges, trailing
edge, elevator, maple motor mounts spars, sheeting,
all misc. blocks or
the L.E. Shaping Jig.
Short Kit price: $60.00 plus $8.50 Shipping
|
|
|
Option #2
Full Kit will include:
All laser cut balsa and plywood parts,
balsa spars, laser cut/notched trailing edge & wingtips, misc.
blocks, sheeting and 1 rolled sheet, CAD drawn plans by Barry Baxter
(per the original design) maple motor mount and a laser cut L.E. Shaping
Jig.
Full Kit price: $72.99 plus $12.50 Shipping
(lower 48 states.)
International shipping: actual
Int'l shipping fees will be applied.
|
Hardware not included.
The “Half Fast III” kits
are
IN MEMORY OF:
“WILD” BILL NETZBAND 4/25/2010
Designed by the late "Wild" Bill
Netzband.
To place your order/s today send all emails to:
halffast3@builtrightflyright.com
Click Here for Building
photos
photobucket Half Fast III
Copyright© 2001-2011
builtrightflyright.com
Ô,
builtrightflyright.com Ô
all rights reserved, site designed, built and
maintained by builtrightflyright.com Ô
|